Ready to ditch that belt for the traditional look and feel of a chain drive? This Belt to Chain Conversion Kit from Lowbrow Customs is a road-tested solution designed to replace your stock belt setup with a durable 530 chain drive.
- Complete Conversion: This kit includes a 24-tooth front sprocket, a 52-tooth chrome rear sprocket, a wheel spacer, top-quality Grade 8 mounting bolts with heavy-duty washers, and a stainless steel locking tab. A 530 Drive Chains is not included and must be supplied separately.
- Maintains Stock Gearing: The 24-tooth front and 52-tooth rear sprockets provide a 2.166:1 gearing ratio, accurately matching the stock gearing for 1994-1999 Dynas.
- Secure Hardware: In addition to Grade 8 bolts and heavy-duty 1/8-inch thick washers, the kit includes a stainless steel locking tab washer that physically stops the sprocket bolts from loosening.
- Proper Fitment:The rear sprocket has a 2.214-inch diameter center hole and is designed to work with the included wheel spacer, which correctly engages the stock rear hub that typically accepts a 1.985-inch center hole.
- Road-Tested Design: This kit was designed, thoroughly road-tested, and approved by Lowbrow Customs to ensure lasting performance.
NOTE: These are made for use in a stock width wheel and Dyna swingarm. If the swingarm you are using is a different width, or you are using a non-stock wheel this may affect the rear sprocket alignment. This is for use with a stock with
Unconditional Satisfaction Guarantee
