Have you been wanting to upgrade your sportster hand clutch over to a foot clutch? The Prism Supply Co. Sportster Foot Clutch Kit contains everything you need to convert your stock Sportster to a foot clutch actuated bike!
Unlike other kits, this kit eliminates the need for a clutch cable altogether.
Each kit contains the following:
- Replacement custom derby/inspection cover in either a tumbled or polish finish
- Stainless steel clutch pedal
- “Magic” coupling assembly with all necessary parts for foot clutch actuation
- Stainless steel bolt and o-ring for plugging the clutch cable hole
- 3D printed clutch shaft installation tool
- All necessary stainless steel mounting hardware
- The 91-93 kit uses your bikes existing OEM clutch ramp while the 94-03 kit comes with a new clutch ramp that’s required for appropriate clutch activation.
Note: This kit will not work with aftermarket “Power Clutch” ramps, if you have one of these in your bike, you will have to change it back to a stock ramp to work with our foot clutch kit.
The Sportster Jockey Shift Kit and jockey shifter arm are sold separately and are necessary to complete the full foot clutch/jockey shift setup!
This kit is designed for mid-controls only. See FAQ for more info.
PATENT PENDING
FAQ:
What happens with the existing clutch cable?
Does it need modified? You will remove your existing clutch cable and discard. No, it doesn’t need modified. Our kit eliminates the need for a cable entirely and an appropriate screw and o-ring are included to plug the clutch cable hole in the primary cover.
Will it work with forward controls?
Currently we are only designing this to work with mid-controls. Eventually we’d like to have a kit for forwards but we aren’t actively working on it at this moment.
What mid controls will this work with?
We have designed and tested this kit to work with both our Sportster Mid Control Kit and Factory H-D mid controls. If you run another brand, this kit will most likely work, but we can’t guarantee it.
Unconditional Satisfaction Guarantee
