Whether you’re replacing a worn-out stock cable or need extra length for taller handlebars, a smooth and reliable throttle cable is essential for a great ride. This top-quality, high-performance replacement from Cycle Standard ensures you get crisp, dependable throttle response every time you twist the grip. For fitment see the Additional Information tab below.
| THROTTLE & IDLE CABLE MEASUREMENTS | |
| Cable End Type | Push In |
| Elbow Length | 5-5/8″ |
| Elbow Angle | 90 degree |
| Housing Length | 31-3/4″ |
| Free Play | 5″ |
|
THROTTLE & IDLE CABLE MEASUREMENT DEFINITIONS See the example diagram above to see how this cable is measured. Note that the diagram is just an example, and is not a drawing of this exact cable! Also, there can be variations of these measurements by +/- .25″ (6mm) due to manufacturing tolerances. Cable End Type: Types are ‘Push In’ and ‘Threaded’. For Harley-Davidson throttle and idle cables ‘Push In’ is 1996-up, ‘Threaded’ style is 1995 and earlier. Elbow Length: Overall length of elbow section, if there is one. Elbow Angle: 45 degree, 90 degree, or N/A (no elbow) Housing Length: Overall length of cable housing, not including adjuster or elbow. Measurement stops at elbow where black housing meets chrome. Free Play: The full amount of travel of the inner cable. Pull inner cable fully to one side, measure length, not including cable end (ferrule) or return spring. |
Only logged in customers who have purchased this product may leave a review.
